top of page

Products - Waterproofing

Foundation

  K11 225 Slurry

Alkali - reactive waterproofing system, direct application on masonry

 

  • Direct application on masonry for exterior and interior substrate

  • Impact and age resistance once hardened

  • Resistance to positive and negative pressure

  • High bonding over 200 KSC

  Under ground membrane

Single layer torchable membrane SBS, APP. 4 or 3 mm thick.

  322 Lankoproof

Waterproof for concrete and mortar

  • Reduces water/cement ratio and segregation

  • Improves waterproofing property of concrete and mortar

  • Reduce cracking

  • No colour effect

Bathrooms, tanks, swimming pools

  K11 222 Concentrate

Thin - coat waterproofing mortar for direct application on masonry

  • Excellent bonding on concrete after immersion

  • Exterior and interior use for basements, cellars, walls, foundations, underground car parks, etc.

  • Non-toxic and suitable for water basins and tanks

  K11 226 Flex

Dual component flexible hydraulic - mortar, approved for contact with potable water.

  • For protection and waterproofing of rendered concrete and masonry

  • Pressure and counter pressure resistant, non-toxic

  • Under-tile sealant for swimming pools and damp premises Resistance to micro-cracking up to 2mm.

  K11 224 Rapid Plug

Instant - setting hydraulic mortar, stopping water leakage

  • Ready to mix powder, ultra fast setting in 30-45 second

  • Exterior and interior use for water tanks, reservoirs, swimming pools, toilet, joint between floor and wall etc. Can be used underwater, high resistance to pressure .

Roofs

  Primer

To prime all types of deck prior to the installation of the water proofing system.

  • To protect basements and underground works (foundation walls) etc.

  • Average coverage: 0.3 liter/m2

  Non protected membrane

  • Non protected single layer torchable membrane with polyester reinforcement.

  • The surface is marked with a line 10cm from the edge to help with positioning of laps.

  Auto protected membrane

Its surface is finished with mineral slate chippings or ceramic granules. Torch-on single or multi-layer waterproofing cap sheet for inaccessible flat roofs and self-protected flat roofs. Suitable for use on profiled metal decks and decks made from timber and timber derivatives, concrete and cellular concrete and non-torchable insulation boards for new and refurbishment projects.

  Aluminum faced membrane

  • It is a glass tissue reinforced SBS elastomeric bitumen modified waterproofing membrane incorporating a metallic protective finish.

  Roof garden waterproofing solution

  • Fully bonded two-layer waterproofing system for roof garden, with anti-roots treatment; drainage board and filter layer.

  Trafficable membrane

  • Auto–protected SBS waterproof membrane to allow traffic on the membrane.

  Bituminem shingle

  • Light tiles bitumen, to replace ceramic roof tiles.

  K10 451 Sovacryl

Flexible acrylic waterproofing system.

  • Ready-to-use for exterior waterproofing of roofs, walls, gutters

  • Can be applied on concrete, mortar, zinc, metal-sheet, timber, plastic and others

  • Flexible up to 400% and resistant for mould, fungus and UV

  • Bridges cracks 1-2 mm. Colour : White, Grey, Green, Red and Blue

  Roofing underlay

  • MICROTOP, to prevent water infiltration trough the tiles.Underlay, provides the necessary protection against moisture intrusion.

  Self - adhesive membrane

Self adhesive waterproofing strips, aluminum faced.

  Rainwater outlet

Prefabricated rainwater outlets to use on flat roofs.

bottom of page